Joyetech eCab Starter Kit

Based on design and structure of eGo series electronic cigarette, the eCab becomes littler and prettier than eGo-T or eGo-C. Most of important, the eCab not only kept changeable Atomizer, but also uses a new changeable Battery. This new battery structure gives the ability to take out and replace the rechargeable battery while using elctronic cigarettes. Benefited from this new battery application, consumers can quickly inspect and change eCab atomizer head and battery at any time when you want. The connector of eCab is completely different, so it is not compatible with 510/510-T/eGo/eGo-T/eGo-C!



The eCab atomizer, empty tank cartridges

The eCab atomizer head is same as Joye eGo-C atomizer head,Cone shape/Type A(Regular). You can simply install it to eCab battery housing, then connect with Joye eCab atomizer body.

The eCab atomizer body uses an innovative new technology by assembling with battery housing directly. It hasn't atomizer base which is different from Joyetech eGo-C. New eCab atomizer body can hold 2ml e-liquid for your convenience. You can easily unscrew the atomizer cover from the battery housing with your hand and assemble the atomizer head. It makes removal and cleaning very conveniently and effectively.

The eCab tank empty cartridges is different from Joye eGo-C/eGo-T tank empty cartridges in appearance and capacity. However, there is some compatibility. You can use Joye eCab empty tank cartridges with Joye eGo-C atomizer body, cone shape/Type A. It is possible to use Joye eGo-C empty tank cartridges, cone shape/type A with Joye eCab atomizer. The overflow prevention caps and rubber Mouthpiece cover is not compatible.

The eCab battery housing, 360mAh rechargeable battery, battery charger, wall charger

To assemble, first insert the 360mAh rechangeable battery (positive terminal first) into the battery housing. Attach the battery cap pushing in until it locks into place. The battery has following features:

Constant voltage output: 3.3V Constant voltage output

5 clicks protection: Press the button 5 times within 1.5 seconds to lock/unlock the battery.

Wrong installation protection: while battery is installed upside down.the control panel will cut off the power supply,protecting the battery and control units . Press the button without any reply.

Low voltage protection: When the battery voltage is lower than 3.3V, LED blinks 40 times ,the battery will shut down.

10 seconds cutoff time!



Full charge may take 2 hours. To charger the battery, place the battery into the charger case insuring the polarity is correct. Plug the power cord into an USB port . Red LED will illuminate to indicate charging. The LED will become green when charging is complete. You can also use AC-USB adapter+charging case to charge it.


Please follow safety instruction

•Please be careful when using any atomizers.

•Pressing the LED button too long can cause the atomizer to overheat. If this happens, stop using the atomizer until it returns to a safe temperature.

•Do not carry the eCab in your pocket with sharp or bulky items like pencils or pen. Carry the eCab in a case to prevent accidental discharges. Also turn off the battery when not in use or when you place it into your pocket.



Joyetech logo eCab Changeable Atomizer Battery Starter Kits Includes


*Joye eCab atomizer body/atomizer cover
1pc
*Joye eCab atomizer head
2pc
*Joye eCab battery housing
sealed battery. One full-charged new battery can support about 150 puffs hours
1pc

*Joye eCab rechargable 360mAh battery(one black, one silver)
2pc
*100-240V 500mA mini flat AC-USB adapter (Optional plugs: US plug or Euro plug) 1pc
*Joye eCab battery charger case 1pc
*Manual(English) 1pc
*Empty semi-transparent eCab tank cartridges (Black for black,red starter kits. White for silver, red, pink starter kits) 3pc(one is unpacked)

.*Silicon eCab overflow prevention caps
2pc

Size of e-cigarette

*Length(cartridge installed): 130mm
*Diameter: 10mm